Next we'll look into the time related APIs exposed by the
✅ Open the
This program will blink (turn on and off) one of the LEDs on the board. The time interval between each toggle operation is one second. This wait time between consecutive operations is generated by the blocking
timer.wait operation. This function call will block the program execution for the specified
The other time related API exposed by the
dk HAL is the
dk::uptime function. This function returns the time that has elapsed since the call to the
dk::init function. This function is used in the program to log the time of each LED toggle operation.
✅ Try changing the
Duration value passed to
Timer.wait. Try values larger than one second and smaller than one second. What values of
Duration make the blinking imperceptible?
❗If you set the duration to below 100ms, try removing the
log::info! command in the loop. Too much logging will fill the logging buffer and cause the loop to slow down, resulting in the blink frequency to reduce after a while.